Skip to main content

Scrapmatts Blind Challenge

I have never done a Blind Challenge before.  In fact I hadn't heard of a Blind Challenge before.

Here's the bumph from Scrapmatts:

"What you will need
All papers need to coordinate it is ideal for your scraps
1 x 30.5cm x 30.5cm page
1 x 24cm x 22.5cm paper 1
1 x 18.5cm x 15.5cm paper 2
1 x 13cm x 8.5cm paper 3
1 x 8cm x 24cm paper 4
1 x 2.5cm x 1.5cm paper 5
Scrapmatts of your choice
Photo
6 x 4 Landscape
Instructions
You may ink or distress as you like
1 take paper 1 and adhere it to you 30.5 x 30.5 page it will need to be 3.5cm from the top of your page and 2mm from the left hand side so 24cm is height
2 Take paper 2 and adhere this 7.5cm from the top and 5mm from the left hand side of the page so 18.5cm is height
3 take paper 3 and adhere it 10.5cm from the top of the page and 2cm from the left hand side so 8.5cm is the height
4 Take paper 4 and adhere it 18.5cm from the top of the page and 7mm from the left hand side of the page so 8cm is height
5 Take paper 5 and adhere it 24cm from the top of the page and 1cm from the left hand side of the page so 1.5cm is height
6 Photo placement your photo will go 13cm from the top and 3.5cm from the left
6 now add you Scrapmatts embellishments as well as any other you would like as well as your title
7 you are now finished your LO"

And that was it, just follow the instructions without knowing what it will look like.

I admit I did sketch it out to work out which papers I wanted to use for which bit.  Then I decided to go out of my comfort zone and use more patterned paper than I usually would.  ( I've noticed I like to use plain quite a lot!)

So here it is:





I've used the BoBunny Forever Fall collection, Scrapmatts CB5056 and CB1115, gold and bronze interference paint and a photo of Brock, my Grandfather's dog.





I half cut around the dragonfly on the big spot paper and slid the next layer of paper underneath so it didn't get covered up a lost.




A close up of the messy painty work on the background.  Because I was using so much pattern it needed something between the base layer and the first layer to give a little contrast.  Didn't bother using a brush... I like getting messy!




I inked the chippies with versamark and heat embossed them with bronze powder.  I used a few layers but was careful to only get it on the top and not the sides.








I simply used the letter stickers in the kit for the title.




'Planted' the twig behind the smallest layer.  I read the instructions for this about ten times convinced I had it wrong!




For the photo and the turquoise layer I inked around the edges with versamark, dipped in to the bronze embossing powder and heated the edges.  I was pleased with the turquoise layer but discovered you need to be careful heating photos or they bubble and warp!  I nearly ruined the photo... lesson learnt!






As I'm typing this no one else has uploaded their LO to the scrapmatts gallery and I am debating in my head whether to go first or chicken out and wait until someone else uploads first!!




Comments

  1. Hello!

    This turned out great! I have never heard of a blind challenge either! Your creation is so colorful and pretty! Wishing you a happy day!

    Hugs,

    Barbara Diane

    ReplyDelete
  2. Fabulous layout, I love all the extra embellishments you have added and he is such a cute doggie.

    ReplyDelete

Post a Comment

Thank you for taking the time to comment.
I love to read your messages...

Popular posts from this blog

WOYWW 159

Hello, Happy Whats On Your Workdesk Wednesday !  As promised a picture of last Wednesdays 'work' finished off.  Post and more photos here . This week I'm showing off the beaded ATC I made... Tricky to photograph so your getting one with flash and one without... It was all parcelled up and sent off to Queen of Desks Julia .  Here is a basic of how it was made... (lots of waffle about wefts and warps!) I use a flexible beading needle.  It is mainly 'eye' so it is very easy to thread. And delica beads which are more regular and accurate than the better known seed bead.  They are slightly more rectangular than round so they line up better. Thread your needle with the weft thread.  (The cross ways thread that weaves back and forth.)  Pick up the beads... Pass the needlefull of beads underneath the warp (tight length ways) threads on the loom... ...and push each bead up in the corresponding g

Hoppity!

Hoppity hoppity!!  :) Hopeful you have arrived here from Fleur 's blog as part of the Crafty Ribbons Easter Hop .  If not and you've found yourself here wondering what on earth I'm on about (and let’s face it J you wouldn’t be the first!!) check out the Inspirations site for all the juicy details! My project for the hop is         Easter bunting!  I cut three templates first - a triangle pennant, a bird and a heart.        Then I cut the pennant shapes from fibre ribbon, threaded them on to some 3mm satin and evenly spaced them.  I embellished each flag with some beads...       I backed the birds and heart on some thin white card and glued them to the centre of the pennants.   My supplies list: yellow fibre , pink fibre , lime fibre , 3mm satin , button box , white card, glue, beads, needle and thread.   At each stop on the hop there'll be a word to collect and a candy draw. I've got these

WOYWW & Card Deck Swap

First up is my desk ... Hmm.  Perhaps the less said the better!  I really should have a sort out but I fancy desking instead! Next I want to share my card deck swaps (deskers don't have to stay for this bit but I reckon you'd enjoy joining in with us, which is why I'm including it in this post) You can read about the swap here on Jessica's blog and sign up here .  Basically, we take a deck of cards, add paint and/or paper, then add a positive sentiment to each card.  Post them to Jessica who shuffles them and sends back 52 different cards from different artists (yes, you are an artist!) from all over the world. These few are ones I have picked out to display first.  I'll swap them round after a few weeks.  Do you like my domino pegs?  :) Thanks for stopping by.  I hope you'll at least consider joining us for the card swap - it's like a super sized ATC swap, and all WOYWW er's know they are fun! See you at your desk x