Skip to main content

Planner Bookmark


I'm sharing my latest planner accessory made using Crafty Ribbons supplies...


I've taken a couple of big buttons, 3 inches of elastic and some of my favourite ribbon; grosgrain Swiss dots.  I chose the ribbon and buttons to match the front of my Pirongs planner.


I attached the stripey button to one end of the ribbon with a few stitches of blingy old thread.  On the other end of the ribbon, I attached the spotty button and the loop of elastic.  Then simply wrap the ribbon around the planner and hook the stretchy loop over the stripey button.  I also added a length of the same ribbon to the spiral binding using a larks head knot to use as a bookmark.

The buttons I chose are 34mm wide and you can find them here and here.

Thanks for stopping by!

Comments

Popular posts from this blog

WOYWW 159

Hello, Happy Whats On Your Workdesk Wednesday !  As promised a picture of last Wednesdays 'work' finished off.  Post and more photos here . This week I'm showing off the beaded ATC I made... Tricky to photograph so your getting one with flash and one without... It was all parcelled up and sent off to Queen of Desks Julia .  Here is a basic of how it was made... (lots of waffle about wefts and warps!) I use a flexible beading needle.  It is mainly 'eye' so it is very easy to thread. And delica beads which are more regular and accurate than the better known seed bead.  They are slightly more rectangular than round so they line up better. Thread your needle with the weft thread.  (The cross ways thread that weaves back and forth.)  Pick up the beads... Pass the needlefull of beads underneath the warp (tight length ways) threads on the loom... ...and push each bead u...

Hoppity!

Hoppity hoppity!!  :) Hopeful you have arrived here from Fleur 's blog as part of the Crafty Ribbons Easter Hop .  If not and you've found yourself here wondering what on earth I'm on about (and let’s face it J you wouldn’t be the first!!) check out the Inspirations site for all the juicy details! My project for the hop is         Easter bunting!  I cut three templates first - a triangle pennant, a bird and a heart.        Then I cut the pennant shapes from fibre ribbon, threaded them on to some 3mm satin and evenly spaced them.  I embellished each flag with some beads...       I backed the birds and heart on some thin white card and glued them to the centre of the pennants.   My supplies list: yellow fibre , pink fibre , lime fibre , 3mm satin , button box , white card, glue, beads, needle and thread.   ...

Feathered Friends

A few feathered smiles for today! I love this little chicks tatty tail.  I can imagine it was packed in the nest and the long tail feathers got in the way a bit!! And our handsome robin... Two smiles for your Friday - Linking up at Friday Smiles :)