Skip to main content

Pink and Green


So I'm still trying to catch up from my health dip...  I never got around to writing a post about this canvas I made for Crafty Ribbons challenge (although you may have seen it on the Inspirations site)




I had a miss hap with some black oil paint - long story short it didn't dry - and rather than discard the whole thing I cut the canvas from the wooden frame.  I sanded the frame and gave it a couple of coats of gesso.


 

Then I got all the pinks and greens from my ribbon collection and started lining them up to find the right widths and patterns.




When I had the order pretty much set in my head I started cutting lengths and stapling them to the frame at the top, stretching them around taught and stapling them at the bottom.

 

I then wove the horizontal ribbons (I'm sure the ribbons running one way are the weft and the ones running the other are the warp... just not sure which is which!!) in.  I only started stapling them when I had them all in place.  This just left a little more leeway.






Here are some of the ribbons I used:
wide green stripe
sheer dots
hearts
saddle stitch
lime fibre
cerise fibre
green grosgrain
pink satin
pink grosgrain (I used the reverse side)
and more!!

And here it is sitting on my shelf...


 
 
 
Thanks for stopping by!!




Comments

Post a Comment

Thank you for taking the time to comment.
I love to read your messages...

Popular posts from this blog

WOYWW 159

Hello, Happy Whats On Your Workdesk Wednesday !  As promised a picture of last Wednesdays 'work' finished off.  Post and more photos here . This week I'm showing off the beaded ATC I made... Tricky to photograph so your getting one with flash and one without... It was all parcelled up and sent off to Queen of Desks Julia .  Here is a basic of how it was made... (lots of waffle about wefts and warps!) I use a flexible beading needle.  It is mainly 'eye' so it is very easy to thread. And delica beads which are more regular and accurate than the better known seed bead.  They are slightly more rectangular than round so they line up better. Thread your needle with the weft thread.  (The cross ways thread that weaves back and forth.)  Pick up the beads... Pass the needlefull of beads underneath the warp (tight length ways) threads on the loom... ...and push each bead u...

Feathered Friends

A few feathered smiles for today! I love this little chicks tatty tail.  I can imagine it was packed in the nest and the long tail feathers got in the way a bit!! And our handsome robin... Two smiles for your Friday - Linking up at Friday Smiles :)

Hoppity!

Hoppity hoppity!!  :) Hopeful you have arrived here from Fleur 's blog as part of the Crafty Ribbons Easter Hop .  If not and you've found yourself here wondering what on earth I'm on about (and let’s face it J you wouldn’t be the first!!) check out the Inspirations site for all the juicy details! My project for the hop is         Easter bunting!  I cut three templates first - a triangle pennant, a bird and a heart.        Then I cut the pennant shapes from fibre ribbon, threaded them on to some 3mm satin and evenly spaced them.  I embellished each flag with some beads...       I backed the birds and heart on some thin white card and glued them to the centre of the pennants.   My supplies list: yellow fibre , pink fibre , lime fibre , 3mm satin , button box , white card, glue, beads, needle and thread.   ...